SUBCHAPTER III—SIMPLIFIED SYSTEM

Historical and Revision Notes

This subchapter provides for a simplified regulatory measurement of vessels that are either non-self-propelled, under 79′ in length, or operated only for pleasure.

§14521. Application

This subchapter applies to a vessel described in section 14501 of this title that is not measured under subchapter II of this chapter.

(Pub. L. 99–509, title V, §5101(3), Oct. 21, 1986, 100 Stat. 1925.)

Historical and Revision Notes

Revised section 14521

Source: Section (U.S. Code) 46 App. U.S.C. 71.

Section 14521 provides that vessels that are to be measured under the regulatory measurement system in this chapter, but are not measured under the standard regulatory measurement system in subchapter II, shall be measured under the simplified measurement system.

§14522. Measurement

(a) In this section, "length" means the horizontal distance of the hull between the foremost part of the stem and the aftermost part of the stern, excluding fittings and attachments.

(b)(1) The Secretary shall assign gross and net tonnages to a vessel based on its length, breadth, depth, other dimensions, and appropriate coefficients.

(2) The Secretary shall prescribe the way dimensions (except length) are measured and which coefficients are appropriate.

(c) The resulting gross tonnages, taken as a group, reasonably shall reflect the relative internal volumes of the vessels measured under this subchapter. The resulting net tonnages shall be in approximately the same ratios to corresponding gross tonnages as are the net and gross tonnages of comparable vessels measured under subchapter II of this chapter.

(d) Under regulations prescribed by the Secretary, the Secretary may determine the gross and net tonnages of a vessel representative of a designated class, model, or type, and then assign those gross and net tonnages to other vessels of the same class, model, or type.

(Pub. L. 99–509, title V, §5101(3), Oct. 21, 1986, 100 Stat. 1925.)

Historical and Revision Notes

Revised section 14522

Source: Section (U.S. Code) 46 App. U.S.C. 71.

Section 14522(a) defines the term "length" as it is used in the simplified measurement system.

Section 14522(b) requires the Secretary to assign gross and net tonnages under the simplified system, based on a vessel's length, breadth, depth, other dimensions and appropriate coefficients, as the Secretary deems appropriate.

Section 14522(c) provides that the gross tonnages as measured under this section shall reflect the relative internal volumes of vessels. It provides further that the net tonnages measured under this section shall be in approximately the same ratio to corresponding gross tonnages as are the net and gross tonnages of comparable vessels measured under the standard regulatory measurement system.