§841. Definitions
As used in this chapter-
(a) "Person" means any individual, corporation, company, association, firm, partnership, society, or joint stock company.
(b) "Interstate" or foreign commerce means commerce between any place in a State and any place outside of that State, or within any possession of the United States (not including the Canal Zone) or the District of Columbia, and commerce between places within the same State but through any place outside of that State. "State" includes the District of Columbia, the Commonwealth of Puerto Rico, and the possessions of the United States (not including the Canal Zone).
(c) "Explosive materials" means explosives, blasting agents, and detonators.
(d) Except for the purposes of subsections (d), (e), (f), (g), (h), (i), and (j) of section 844 of this title, "explosives" means any chemical compound mixture, or device, the primary or common purpose of which is to function by explosion; the term includes, but is not limited to, dynamite and other high explosives, black powder, pellet powder, initiating explosives, detonators, safety fuses, squibs, detonating cord, igniter cord, and igniters. The Attorney General shall publish and revise at least annually in the Federal Register a list of these and any additional explosives which he determines to be within the coverage of this chapter. For the purposes of subsections (d), (e), (f), (g), (h), and (i) of section 844 of this title, the term "explosive" is defined in subsection (j) of such section 844.
(e) "Blasting agent" means any material or mixture, consisting of fuel and oxidizer, intended for blasting, not otherwise defined as an explosive: Provided, That the finished product, as mixed for use or shipment, cannot be detonated by means of a numbered 8 test blasting cap when unconfined.
(f) "Detonator" means any device containing a detonating charge that is used for initiating detonation in an explosive; the term includes, but is not limited to, electric blasting caps of instantaneous and delay types, blasting caps for use with safety fuses and detonating-cord delay connectors.
(g) "Importer" means any person engaged in the business of importing or bringing explosive materials into the United States for purposes of sale or distribution.
(h) "Manufacturer" means any person engaged in the business of manufacturing explosive materials for purposes of sale or distribution or for his own use.
(i) "Dealer" means any person engaged in the business of distributing explosive materials at wholesale or retail.
(j) "Permittee" means any user of explosives for a lawful purpose, who has obtained either a user permit or a limited permit under the provisions of this chapter.
(k) "Attorney General" means the Attorney General of the United States.
(l) "Crime punishable by imprisonment for a term exceeding one year" shall not mean (1) any Federal or State offenses pertaining to antitrust violations, unfair trade practices, restraints of trade, or other similar offenses relating to the regulation of business practices as the Attorney General may by regulation designate, or (2) any State offense (other than one involving a firearm or explosive) classified by the laws of the State as a misdemeanor and punishable by a term of imprisonment of two years or less.
(m) "Licensee" means any importer, manufacturer, or dealer licensed under the provisions of this chapter.
(n) "Distribute" means sell, issue, give, transfer, or otherwise dispose of.
(o) "Convention on the Marking of Plastic Explosives" means the Convention on the Marking of Plastic Explosives for the Purpose of Detection, Done at Montreal on 1 March 1991.
(p) "Detection agent" means any one of the substances specified in this subsection when introduced into a plastic explosive or formulated in such explosive as a part of the manufacturing process in such a manner as to achieve homogeneous distribution in the finished explosive, including-
(1) Ethylene glycol dinitrate (EGDN), C2H4(NO3)2, molecular weight 152, when the minimum concentration in the finished explosive is 0.2 percent by mass;
(2) 2,3-Dimethyl-2,3-dinitrobutane (DMNB), C6H12(NO2)2, molecular weight 176, when the minimum concentration in the finished explosive is 0.1 percent by mass;
(3) Para-Mononitrotoluene (p-MNT), C7H7NO2, molecular weight 137, when the minimum concentration in the finished explosive is 0.5 percent by mass;
(4) Ortho-Mononitrotoluene (o-MNT), C7H7NO2, molecular weight 137, when the minimum concentration in the finished explosive is 0.5 percent by mass; and
(5) any other substance in the concentration specified by the Attorney General, after consultation with the Secretary of State and the Secretary of Defense, that has been added to the table in part 2 of the Technical Annex to the Convention on the Marking of Plastic Explosives.
(q) "Plastic explosive" means an explosive material in flexible or elastic sheet form formulated with one or more high explosives which in their pure form has a vapor pressure less than 10−4 Pa at a temperature of 25°C., is formulated with a binder material, and is as a mixture malleable or flexible at normal room temperature.
(r) "Alien" means any person who is not a citizen or national of the United States.
(s) "Responsible person" means an individual who has the power to direct the management and policies of the applicant pertaining to explosive materials.
(t)
(Added
Editorial Notes
References in Text
For definition of Canal Zone, referred to in subsec. (a), see section 3602(b) of Title 22, Foreign Relations and Intercourse.
Section 102 of the Federally Recognized Indian Tribe List Act of 1994 (25 U.S.C. 479a), referred to in subsec. (t), was classified to section 479a of Title 25, Indians, prior to editorial reclassification as section 5130 of Title 25.
Amendments
2010-Subsec. (t).
2002-Subsec. (d).
Subsec. (j).
Subsec. (k).
Subsec. (l).
Subsec. (p)(5).
Subsecs. (r), (s).
1996-Subsecs. (o) to (q).
Statutory Notes and Related Subsidiaries
Effective Date of 2002 Amendment
Amendment by section 1112(e)(1), (3) of
Amendment by section 1122(a) of
Effective Date of 1996 Amendment
Effective Date
"(a) Except as provided in subsection (b), the provisions of chapter 40 of title 18, United States Code, as enacted by section 1102 of this title shall take effect one hundred and twenty days after the date of enactment of this Act [Oct. 15, 1970].
"(b) The following sections of chapter 40 of title 18, United States Code, as enacted by section 1102 of this title shall take effect on the date of the enactment of this Act [Oct. 15, 1970]: sections 841, 844(d), (e), (f), (g), (h), (i), and (j), 845, 846, 847, 848 and 849 [no section 849 was enacted]."
Short Title of 2002 Amendment
Short Title of 1982 Amendment
Short Title of 1975 Amendment
Findings and Purposes of Title VI of Pub. L. 104–132
"(a)
"(1) plastic explosives were used by terrorists in the bombings of Pan American Airlines flight number 103 in December 1988 and UTA flight number 722 in September 1989;
"(2) plastic explosives can be used with little likelihood of detection for acts of unlawful interference with civil aviation, maritime navigation, and other modes of transportation;
"(3) the criminal use of plastic explosives places innocent lives in jeopardy, endangers national security, affects domestic tranquility, and gravely affects interstate and foreign commerce;
"(4) the marking of plastic explosives for the purpose of detection would contribute significantly to the prevention and punishment of such unlawful acts; and
"(5) for the purpose of deterring and detecting such unlawful acts, the Convention on the Marking of Plastic Explosives for the Purpose of Detection, Done at Montreal on 1 March 1991, requires each contracting State to adopt appropriate measures to ensure that plastic explosives are duly marked and controlled.
"(b)
Marking, Rendering Inert, and Licensing of Explosive Materials
Congressional Declaration of Purpose
Modification of Other Provisions
"(a) The National Firearms Act (chapter 53 of the Internal Revenue Code of 1986);
"(b) Section 414 of the Mutual Security Act of 1954 (22 U.S.C. 1934), as amended, relating to munitions control;
"(c) Section 1716 of title 18, United States Code, relating to nonmailable materials;
"(d) Sections 831 through 836 of title 18, United States Code; or
"(e) Chapter 44 of title 18, United States Code."
Continuation in Business or Operation of Any Person Engaged in Business or Operation on October 15, 1970
Authorization of Appropriations
1 So in original. Probably should not be capitalized.
2 So in original. The second closing parenthesis probably should not appear.